Like ToolFern? Prefer us as your source on Google →

Battery Pack Size & Layout Builder

Three quick steps: pick the battery type, pick the cell, and say how many. You see at once how big the pack will be in mm, cm, inches or feet, its voltage, capacity and weight, and the best way to arrange the cells. A 3D view you can turn and a top view show the layout, and you can check what fits in your space and how it compares with a lead-acid battery.

Units

1 Pick the battery type

2 Pick the cell

Cell size and ratings (filled in for you, change them to match your datasheet)

C rating: 1 C means a current equal to the capacity, so 5 C on a 3 Ah cell is 15 A.

3 Say how many cells

Help me pick: I need this voltage and capacity

4 Optional: does it have to fit a space?

Type the inside size of your box or battery bay. The tool tries every S and P and every layout, and lists what fits, most energy first.

Advanced options (layout, spacing, wrap, BMS)

Good starting values are already filled in. Change them only if you need to.

Layout

Spacing and wrap

BMS (the board that protects the pack)

Your pack

Outer size, length x width x height
- -
-
Voltage (nominal)
-
Capacity
-
Energy
-
Weight, about
-
Pack and cells

3D view

Drag the picture to turn it (on a phone, swipe sideways). The view buttons show it from the top, front or side. The colours match the top view below.

Top view of the layout

Each colour is one parallel group. Numbers run from 1 at B- (pack minus) to the last group at B+ (pack plus). Grey lines are the parallel nickel strips, dashed lines the series links. For standing cells, + or - shows which end is on top.

More results (current, volume, packing)
-
Full / empty voltage
-
Steady / peak current
-
Outer volume
-
Energy per kg and per litre (Wh/kg, Wh/L)
-
Packing (how much of the box is cells)

Other ways to arrange the same cells

Packing is the cell volume divided by the box around the cells. Square rows of round cells reach about 78.5% at best, staggered rows about 90.7%. Sizes include the BMS and wrap.

How does this compare with lead-acid?

Lead-acid sizes and weights are typical figures for common sealed (SLA/AGM) batteries. Check the datasheet of the exact model before you buy or cut a box.

Build notes, nickel strip and parts list

    Nickel strip ratings (typical, edit to match your strip; strip is sold in mm):

    UseStripThickness (mm)Width (mm)Safe current (A)
    Pure nickel
    Pure nickel
    Pure nickel
    Nickel-plated copper

    Parts list

    Summary to print

    Please note: every size, weight and rating here is a typical planning figure. Check each part's datasheet. This tool is not a substitute for professional pack design. Lithium cells can catch fire if they are shorted, overcharged, overdischarged, crushed or badly welded. Always use a BMS and a fuse, and build on a fire-safe surface.

    How to plan a pack with this builder

    1. Choose your units at the top: mm, cm, inches or feet and inches, and kg or lb.
    2. Pick the battery type. Lithium-ion, LiFePO4, LiPo or sodium-ion. Each button says what it is good for.
    3. Pick the cell. The list shows only cells of that type and fills in typical sizes, weight, capacity and ratings. Choose My own cell to type in your datasheet.
    4. Set S and P. S is how many cells are in series (more voltage), P how many sit side by side in each group (more capacity). Not sure? Type the voltage and capacity you need and the tool suggests S and P.
    5. Read the result card. It shows the outer size in both units, voltage, capacity, energy, weight and the best layout, with a button to use it.
    6. Go further if you like. Check what fits a space, open Advanced options for spacing, wrap and the BMS (the board that protects the pack), compare with lead-acid, and copy a link or print the summary.

    Square rows or staggered rows

    Round cells in square rows sit one diameter apart in both directions, so they fill at most about 78.5% of the box around them (pi divided by 4). In staggered (hex) rows every second row moves over by half a cell and drops into the gaps, so the rows are only 0.866 of a pitch apart. That can fill up to about 90.7% of the box. The catch is the extra half cell on the length, which makes staggered packs with only two or three rows no smaller, and the need for hex holders and zigzag strips. The table of other layouts shows the real numbers for your pack, so you can see when it pays off.

    What the outer size includes

    The size starts with the cells themselves, the gap between them and the allowance at each cell end for nickel strip and insulating paper. The BMS board is then added on one face, with 1 mm of insulation between it and the cells. If the board is wider than that face, the face grows to fit it. Finally the wrap is added on every side. Weight is the cells plus the BMS, plus a percentage you can change for nickel, wire and wrap.

    Using the fit finder

    Open Does it have to fit a space? and enter the length, width and height of the space you have, in whichever unit you picked. The tool tries every series and parallel count up to your limits, and every layout with the cells standing and lying, and lists the ones that fit, most energy first. Set a lowest and highest voltage to keep only the packs that suit your device, for example 36 to 42 V for a 10S e-bike pack.

    Lithium against lead-acid

    Lead-acid batteries last longest when you use only about half of their rated capacity, so a 12 V 100 Ah AGM battery gives about 600 Wh you can really use. The comparison takes the usable energy of your pack, finds lead-acid batteries that give the same at about the same voltage, and shows their size and weight next to yours. All the lead-acid sizes are typical figures, so check the model you have in mind.

    Frequently asked questions

    How big will a 4S3P 18650 pack be?

    Twelve 18650 cells (18.4 mm across, 65.2 mm long) standing in 4 rows of 3 make a core of about 74 x 55 x 66 mm with 1 mm at each cell end. The BMS and the wrap then add to that: with a board sized for the full 45 A of 15 A cells and 1 mm of wrap, the tool gives about 102 x 70 x 68 mm, and laying the same cells out 2 long by 6 wide saves about a fifth of the volume. It works this out for your exact cell, gap, BMS and wrap.

    What is hex or staggered packing, and is it always smaller?

    In staggered packing every second row is shifted by half a cell, so the rows nest into each other. The row spacing drops from one cell diameter to about 0.866 of it (pitch times the square root of 3, divided by 2). Each shifted row also adds half a cell to the length, so with only two or three rows it can come out bigger. With many rows it wins: round cells fill about 78.5% of a box in square rows and up to about 90.7% when staggered.

    Where should the BMS go?

    Usually flat against the face of the pack where it adds the least size, often the end or the top. The tool tries each face, checks whether the board fits inside that face, and tells you how many millimetres it adds. Keep the balance leads short and in order from B- upwards, and put insulation between the board and the cells.

    How does a lithium pack compare with a lead-acid battery?

    Lead-acid is normally used to about half its capacity so it lasts, while lithium can use most of its capacity. The tool finds the lead-acid batteries on the market that give the same usable energy at about the same voltage and shows how much volume and weight you save, and whether your pack fits in the same space. A 12.8 V 100 Ah LiFePO4 pack often replaces two 12 V 100 Ah AGM batteries at well under half the weight.

    What BMS current rating do I need?

    Pick a BMS rated at least 1.25 times the highest continuous current you will draw. If you do not enter a current, the tool uses the continuous rating of the cells, which is P times the cell capacity times its C rating. A 4S3P pack of 3 Ah cells rated 5 C can give 45 A, so it would need a BMS of about 57 A or more.

    How much nickel strip do I need?

    The series links carry the full pack current, so the strip there must be rated for it, or you stack or double the strips. The tool uses a small table of typical strip ratings you can edit, works out how many strips each link needs, and estimates the total length as two ends per cell times the cell pitch, plus 15% for waste.

    Can I see the sizes in inches or centimetres?

    Yes. Use the Units bar at the top of the tool to pick millimetres, centimetres, inches or feet and inches, and kilograms or pounds. Every box you type in and every result, table and drawing switches to that unit, and the main size is always shown in both metric and inches. For inches you can also turn on fractions to the nearest 1/16 inch. You can type values like 2 3/4 or 1' 3" and the tool remembers your choice for next time.

    Which battery type should I pick?

    Pick Lithium-ion for most small and medium packs such as e-bikes, scooters, tools and power banks, because 18650 and 21700 cells give a lot of energy for their size. Pick LiFePO4 for solar, camper, boat and 12 V lead-acid replacements, because it is very safe and lasts thousands of cycles, but it is bigger and heavier for the same energy. Pick LiPo for thin, light packs in drones and RC models. Sodium-ion is newer, has no lithium and works better in the cold, but it is heavier and harder to buy.

    Are the sizes exact?

    No. Cell sizes vary a little between makers and batches, and holders, welds and wraps add their own thickness. Every figure is a typical planning value. Measure your real cells and check every datasheet before you cut a box or order an enclosure.

    Related: battery pack calculator · battery backup calculator · battery charging calculator · solar battery bank calculator · Ah to Wh calculator · wire size calculator.

    Found this useful? Share it