How to use this calculator
- Enter the area in square feet.
- Enter the R-value you want (check your climate zone and local code).
- Pick the insulation type and enter the coverage printed on the package.
Thickness from R-value
R-value measures resistance to heat flow. Each material has an R-value per inch, so thickness = target R divided by R per inch. R-38 in an attic takes about 12 inches of fiberglass batt or 10 inches of cellulose.
The volume is the area times the thickness. Bundles or bags are the area (with waste) divided by the coverage printed on the package for that R-value.
Frequently asked questions
What R-value do I need in an attic?
US recommendations run from about R-30 to R-60 depending on climate zone. Check your local code or energy office.
How thick is R-38 insulation?
About 12 inches of fiberglass batt, 10 inches of cellulose or 6 inches of closed-cell spray foam.
Is higher R-value always better?
Higher is better up to the point of diminishing returns; air sealing matters as much as thickness.
Does this cover vapor barriers?
No. Vapor and air barrier rules depend on your climate and wall design.