Like ToolFern? Prefer us as your source on Google →

Post Footing Calculator

Work out the concrete needed for post holes and footings, minus the space the post takes up.

-
Concrete per hole (cu ft)
-
Total (cu yd)
-
Bags to buy

Estimates for planning only. Check product labels and your local code, and have a licensed professional confirm structural or electrical work. Footing depth must reach below the frost line and follow your local code. A bell or wider base may be required for heavy loads.

How to use this calculator

  1. Enter the hole diameter and depth.
  2. Enter the post size so its volume is subtracted.
  3. Enter the number of posts, the bag size and a waste allowance.

Concrete for a round footing

A round hole holds pi times the radius squared times the depth. The post takes up some of that space, so subtract its square cross-section times the buried depth.

Multiply by the number of holes, add waste, and divide by the volume a bag yields: about 0.45 cubic feet for a 60 lb bag. Round up once for the whole job.

Frequently asked questions

How many bags of concrete per post?

A 12 in wide, 36 in deep hole with a 4x4 post needs about 2 cubic feet, or five 60 lb bags.

How deep should a post footing be?

Below the local frost line and at least one third of the post height. Check your code.

Do I need gravel at the bottom?

Many builders add 4 to 6 inches of gravel for drainage under the post.

Does it work for fences and decks?

Yes, for any post set in concrete. Decks usually need engineered footings, so check local rules.

Found this useful? Share it