How to use this calculator
- Enter the deck length and width.
- Enter the actual board width (5.5 in for 5/4x6), the gap and the board length you will buy.
- Set the joist spacing and waste, then read the totals.
How decking is calculated
Each row of decking covers the board width plus the gap. Divide the width of the deck by that to get the rows, multiply by the length for the linear feet, add waste and divide by the board length.
Joists run across the width at 12, 16 or 24 inch centers. The count is the length divided by spacing plus one. Screws are estimated at two per board crossing a joist.
Frequently asked questions
How many deck boards do I need for a 12x16 deck?
With 5.5 in boards and a 1/8 in gap that is about 26 rows. At 16 ft long and 10 percent waste, about 29 boards.
What joist spacing should I use?
16 inches on center is standard; use 12 inches for diagonal decking or composite that requires it.
How many screws per board?
Two screws at each joist the board crosses.
Does it include framing?
It counts joists only. Beams, posts and footings depend on span, load and local code.