How to use this calculator
- Enter the total length and the number of 4 ft gates.
- Set the post spacing (8 ft is common).
- Choose picket or panel style and fill in picket width and gap.
- Read the posts, rails, pickets and concrete.
How fence materials are counted
Subtract gate openings from the length, divide by the post spacing and round up to get the sections. Posts are sections plus one, plus an extra post for each side of a gate.
For picket fences, the number of pickets is the run in inches divided by picket width plus gap. Panels are simply one per section. Concrete is estimated at two 50 lb bags per post hole.
Frequently asked questions
How many posts for 100 feet of fence?
With 8 ft spacing, 100 ft needs 13 sections and 14 posts, plus extra posts for any gates.
How many pickets per foot?
With 5.5 in pickets and a 0.5 in gap, about 2 pickets per foot of fence.
How much concrete per post?
About two 50 lb bags per hole for a 4x4 post, or three for taller posts and soft soil.
How deep should post holes be?
At least one third of the post length and below the frost line in cold climates. Check local rules.