Like ToolFern? Prefer us as your source on Google →

Drywall Calculator

Work out how many sheets of drywall a room needs, plus screws, joint tape and joint compound.

-
Surface area (sq ft)
-
Sheets to buy
-
Screws (about)
-
Joint tape (ft)
-
Joint compound (gal)

Estimates for planning only. Check product labels and your local code, and have a licensed professional confirm structural or electrical work. Screws about 1 per sq ft, tape about 0.37 ft per sq ft, compound about 1 gallon per 100 sq ft of board.

How to use this calculator

  1. Enter the room length, width and wall height.
  2. Choose walls only or walls and ceiling and subtract the area of doors and windows.
  3. Pick your sheet size and a waste allowance, then read the sheets and supplies.

How much drywall do I need?

Wall area is the perimeter times the height; add length times width for the ceiling. Subtract large openings, add a waste allowance of about 10 percent for cuts, then divide by the area of one sheet and round up once.

Longer 4 x 12 sheets mean fewer seams on large walls. Tape, screws and joint compound are estimated from the board area using common rules of thumb.

Frequently asked questions

How many sheets of drywall for a 12x10 room?

An 8 ft high 12x10 room has 352 sq ft of wall area. After typical openings and 10 percent waste that is about 10 to 11 sheets of 4x8, or 14 with the ceiling included.

How much waste should I allow?

About 10 percent for simple rooms and 15 percent or more for rooms with many angles.

How many screws per sheet?

About 32 screws for a 4x8 sheet, roughly 1 per square foot.

Do I subtract windows and doors?

You can subtract large openings, but many pros do not subtract small ones, because the cut-outs are rarely usable.

Found this useful? Share it